VFD, 0.5hp, 0.37kW, 1.2 Amp, 380-480V 3 Phase Input/Output, with LED Keypad and EMC Filter, No Internal Brake Transistor, IP66/NEMA4X Indoor/Outdoor Switched, Frame Size 1: 9.13 x 6.34 x 6.38" (HWD), Optidrive E3 Series
The Optidrive E3 from Invertek is a general purpose sensorless vector drive that is great for most motor types.
E3 series, 3 phase rated drives (with the exception of Size 4 IP66/NEMA 4X models) can be derated by 50% for use in single phase power applications. Please see more information under 'Documents'.
Invertek offers single phase input drives up to 10 hp, these drives are not derated.
This is the most popular, general purpose drive from Invertek
Available from 0.5 to 50hp
Single and 3 phase input, 110 to 480V models
Single phase input models available up to 10hp!
Choose from IP20 or IP66/NEMA 4X models
Switch between Industrial or Pump & Fan modes
Simple set up – just 14 basic parameters and functions
Includes models for single phase motors
Can be used with all motor types; induction, AC permanent magnet, brushless DC, line start PM, synchronous reluctance
Internal Category C1 EMC filter
2 year warranty
IP20 (part #'s ending in 2):
Available up to 50hp, no disconnect switch
Indoor rated
3 phase models can be derated by 50% for use in single phase power applications
IP66/NEMA 4X (part #'s ending in A or B):
Ending in B is Outdoor, with disconnect switch
Ending in A is Outdoor, no disconnect switch
Outdoor rated, dust-tight and washdown ready!
Please note: For IP66/NEMA 4X three phase input models, chassis size 4 is not capable of being derated for use in applications supplying single phase power to these units.
Size 4 chassis use film capacitors which prohibit single phase operation.
Single Phase Input/Output:
Available from 0.5 to 1,5hp
For use on permanent split capacitor (PSC) or shaded pole induction motors
These drives end in -01
Higher horsepower 3 phase models can be derated for use in single phase power applications.
Switch between industrial mode, pump mode and fan mode
14 parameter basic setup, default settings suitable for most applications
Internal Category C1 EMC filter
Features Include:
Supply Voltage: 380-480 V
Input Phases: 3
Supply Current Continuous: 1.7 A
Supply Fuse or MCB (Type B): 6 A
Frame Size: 1
Height: 232 mm (9.13 in)
Width: 161 mm (6.34 in)
Depth: 162 mm (6.38 in)
EMC Filter: Internal EMC Filter
Brake Transistor: No Internal Brake Transistor
Enclosure: IP66 Outdoor Switched
Display: LED
Small mechanical envelope
Rugged industrial operation
Fast setup, and simple operation with 14 basic parameters
Unique motor control strategy optimized for single phase motors
Motor current and rpm indication
Built in PI control, EMC filter (C1) & brake chopper
Application macros for industrial, fan and pump operation
Bluetooth Communication/Rapid Communication Tool, Use with Invertek E3, P2 and Eco Drives, Use to Copy Parameters Between Drives, Copy/Backup/Restore, Provides Bluetooth Wireless Interface to PC/Phone
