ODE-3-140012-3F1B-MTP

The Invertek Optidrive E3 IP66 Modbus TCP drives are general purpose variable frequency drives for motor speed control on conveyors, pumps and fans, built for washdown and outdoor locations and connected to the control system over Modbus TCP. This group covers the switched models, which add a lockable mains disconnect, a speed potentiometer and a forward/stop/reverse switch for local control at the motor, with power ratings from 0.5hp to 30hp across four frame sizes.

Key Features

• Modbus TCP communication for integration with PLCs and plant networks
• IP66/NEMA 4X sealed enclosure with corrosion resistant heatsink for indoor, outdoor and high-pressure washdown locations
• Integrated lockable mains disconnect, speed potentiometer and forward/stop/reverse switch
• Sensorless vector speed control for induction, PM, BLDC and synchronous reluctance motors
• Output frequency 0-500Hz; overload 150% for 60 seconds and 175% for 2.5 seconds
• Internal PI controller with standby/sleep function for pump and fan control
• 4 programmable inputs (2 digital, 2 analog/digital) and 2 programmable outputs (1 analog/digital, 1 relay)
• Simple setup with 14 basic parameters
• Built-in brake transistor on frame sizes 2-4; models available with or without internal EMC filter
• Operating temperature -20 to 40°C (up to 50°C with derating); humidity 95% max non-condensing
• Frame sizes 1-4, 0.5-30hp, with 110-115V single phase, 200-240V single or 3 phase, and 380-480V 3 phase input models