Teco Westinghouse
XP7/54C
Motor, XP, 7.5hp, 1800rpm, 3 Phase, 230/460V, 213TC AEHHXG/AEHHXF, NEMA Premium, Footed, C-Face, IP55
$1,359.25
Product image is representative only, please verify specifications.
PM1/54C
Alt: MAX-PM Series
$625.57
Motor, 1.5hp, 1800rpm, 230/460V, 145T Frame, TEFC Enclosure, IP55, Super Premium Efficiency Permanent Magnet Motors, MAX-PM (PMAC Motor)
- Weight:
- 46.00 LBS
- Minimum Purchase:
- 1 unit
Description
TECO-Westinghouse manufacturers motors, variable frequency drives and soft starters.
In 1995 TECO acquired all Westinghouse Electric Corp. shares and in 1997 the name was officially changed to TECO-Westinghouse Motor Company (TWMC). They are headquartered in Round Rock, Texas.
After acquiring Motovario, TECO also has a line of gearmotors.
Features Include:
- Voltage: 230/460
- Output Range: 1.5 HP
- RPM Rated: 1800
- Frame Size: 145T
- Time Duty Continuous, Service Factor: 1.0 (S1)
- Protection Enclosure Totally Enclosed: (IP55)
- Mounting Horizontal Foot Mounting: F-1 (IM 1001)
- Cooling Method: Frame-Surface Cooled with a Fan (IC 411)
- Power Condition: Voltage: ±10%, Frequency: ±5%, and ±10% of Combined Voltage and Frequency, but frequency variation does not exceed ±5%
- Starting Method: Controlled by Permanent Magnet Synchronous Motor Inverter
- Direction of Rotation: Bi-Directional
- Drive Method: Direct Coupling Service
- Placement Recommendation: Shadow, Non-Hazardous
- Ambient Temperature: -20˚C~40˚C
- Relative Humidity: Less than 90% RH (Non-Condensation)
- Altitude: Less than 3,300 ft
- Frame: High Grade Cast Iron with 2 Drain Holes at Bottom
- End Bracket: High Grade Cast Iron
- External Fan: Plastic
- Fan Cover: Pressed Steel
- Shaft: Carbon Steel, Cylindrical Single Extension with Keyseat and Key
- Bearing: Grease Pre-Packed, Shielded Rolling Bearings
- Lubricant: Mineral Oil, Li-Base Grease (MULTEMP SRL)
- Shaft: Flinger V-Ring on Both Ends
- Terminal Box: Pressed Steel, Larger Size, Can be Set 90° Apart, with Clearance
- Hole: Cable Entrance, F-1 & F-2 Interchangeable
- Stator Insulation: Class F Insulation System
- Rotor Structure: Permanent Magnet NdFeB
- Painting System: Phenolic Rust Proof Base Plus Lacquer Surface Finished
- Color: Green (Munsell 10GY 5/12)
- Temperature: Rise Not to Exceed 80˚C for 1.0 Service Factor by Resistance Method
- Over Torque: 150% Rated Torque for 60 Seconds
Technical Information:
- Teco Westinghouse Beyond Premium Efficiency Motor Solutions Flyer
- Teco Westinghouse MAX-PM Permanent Magnet AC Motors Brochure
- Teco Westinghouse MAX-PM Permanent Magnet AC Motors Datasheet
- Teco Westinghouse MAX-PM Permanent Magnet AC Motors Performance Data
- Teco Westinghouse MAX-PM Permanent Magnet AC Motors Sales Document
Learn More About Motors Here!
Accessories
Check any items you would like to add to your cart, and then tap the ‘Add Selection to Cart’ button.
Teco Westinghouse
PM7/54C
Motor, 7.5hp, 1800rpm, 230/460V, 213T Frame, 91.9% FL Efficiency, 10.4 FL Amps (460V), 3 Phase, TEFC, Footed, IP55, Super Premium Efficiency Permanent Magnet Motors, MAX-PM™ (PMAC Motor) (Drop Ship Only Via Truck)
$1,270.88
Teco Westinghouse
EPV7/54C
Motor, 7.5hp, 1800rpm, 213TC Frame 8.85FL A (460V) 230/460V Round Body, C-Face, MAX-E1™ NEMA Premium TEFC
$925.26
Teco Westinghouse
EPV1/54C
Motor, 1.5hp, 1800rpm, 145TC Frame 2.08FL A (460V) 230/460V Round Body, C-Face, MAX-E1™ NEMA Premium TEFC
$424.96
Teco Westinghouse
XP1/54C
Motor, Explosion Proof, 1.5hp, 1800rpm, 4-Pole, Three Phase, 230/460V, 60Hz, 145TC Frame, 86.5% Full Load Efficiency, 75.5% Full Load Power Factor, 2.1 FL A (460V), AEHHXF Type, Footed, C-Face, TEXP NEMA Premium Efficiency, IP55, Crated-Must Ship LTL
$688.87