IANF2E
Alt: AMCI by IDEC
Motion Controller, 2-Axis Stepper Controller, Master Module With Modbus TCP
- Minimum Purchase:
- 1 unit
Many users are frustrated by the complexity and high cost of implementing a motion control system. IDEC and AMCI (an established motion control system supplier) partnered to offer a simple stepper motion control system!
Use these steppers with Idec FC6A PLC's.
The IANF2 controllers offer two independent motion control axes that function in open loop configuration (or in closed loop using the available encoder feedback). Each axis can drive a stepper or a servo with step/direction input capability! The ANF2 can synchronize its two axes allowing you to control linear and circular motions in an XY plane.
AMCI-IDEC IANF2 expansion modules allow you to easily interface up to 12 motion axes using a single network connection which reduces physical wiring and streamlines network traffic.
No other product rivals the flexibility, performance, and value of AMCI-IDEC IANF2 Motion Controllers!
Our IDEC by AMCI product line includes controllers, stepper motors, a combo controller+drive, a combo drive+steper motor and the 3-in-1 controller+drive+stepper motor.
- Controller (IANF2) - a 2-axis motion controller that is expandable up to 12 axes. It can accept encoder feedback which provides stall detection and move verification. The controller includes 6 discrete inputs and 4 discrete outputs.
- Drive + Controller (IANG1) - the integrated stepper controller + drive combo is a new approach to PLC-based motion control systems! This system can be expanded up to 6 axes.
- Stepper Motor (ISM2340) - Available in standard NEMA 23 frame sizes with output torque rating of 130 and 240 oz-in.
- Stepper Motor + Drive (ISMD23) - This motor-drive combo can control one to six axes of motion plus it combines the features of the two-axes controller and the drive into a single unit!
- Stepper Motor + Drive + Controller (ISMD23E) - Gives you all-in-one-motion control with all the features of the two-axis controller, drive and stepper motor.
Learn more about the IDEC by AMCI partnership and products here.
Marshall Wolf Automation is your authorized IDEC distributor, in-house tech support is readily available.
Features Include:
- 2-axis motion controllers with expansion capabilities
- Expand up to 12 axes
- Interpolated motion (circular & linear)
- Encoder feedback for closed loop motion control
- Use for Servo or Stepper control
- Simplified programming with WindLDR macro instructions
- Number of Channels: 2
- Motion Capabilities: Two independent single axes or interpolation (circular & linear)
- Maximum Output Frequency: 1MHz differential, 100KHz open collector
- Auxiliary Input: CW limit switch or E-stop input
- Encoder Feedback: 1 per axis: A, B, and Z differential inputs
- Read more: Blog on Stepper Motors