Ships from manufacturer in ~70 days (as of 10/12/2026)
171992
Alt: RPS-M-2131SR175M
$405.65
Rope Pull Switch with Pull-to-Reset Button, E-Stop, Thimble for Wire Pull, Indication of Correct Rope Tension, 3 x Cable Entry M20x1.5, Switching Elements with 4 Switching Contacts
- Weight:
- 1.81 LBS
- Minimum Purchase:
- 1 unit
Description
The Euchner RPS series rope pull switch is an emergency stop device for long machine installations and conveyor lines, allowing a stop signal to be triggered from any point along a tensioned pull wire without installing individual E-stops at short intervals. Pulling the wire, a wire break or the latching E-stop button on the housing actuates the safety contacts and stops the machine; the switch is reset with a pull-to-reset button.
Key Features
- Emergency stop device with detent mechanism according to EN ISO 13850 and EN 60947-5-5
- Triggered by pulling the rope, rope breakage or the E-stop button on the housing
- Center operating position with two switch-off positions
- Indication of correct rope tension for setup and readjustment
- Pull-to-reset button
- RPS-M versions with metal housing