Ships from manufacturer in ~70 days (as of 7/21/2026)
167912
Alt: RPS3131PC300SFM5C2626
$646.42
Rope pull Switch with pull-to-reset button for EMERGENCY STOP device, clamping head
- Weight:
- 2.01 LBS
- Minimum Purchase:
- 1 unit
Description
The Euchner RPS series rope pull switch is an emergency stop device for long machine installations and conveyor lines, allowing a stop signal to be triggered from any point along a tensioned pull wire without installing individual E-stops at short intervals. Pulling the wire, a wire break or the latching E-stop button on the housing actuates the safety contacts and stops the machine; the switch is reset with a pull-to-reset button.
Key Features
- Emergency stop device with detent mechanism according to EN ISO 13850 and EN 60947-5-5
- Triggered by pulling the rope, rope breakage or the E-stop button on the housing
- Center operating position with two switch-off positions
- Indication of correct rope tension for setup and readjustment
- Pull-to-reset button
- RPS-M versions with metal housing