136353
Euchner_136353_Primary.png
2 available from manufacturer (as of 9/28/2026)
Euchner

136353

Alt: RPS-M-3131SC175SFM5RL024C2470

$832.41

Rope Pull Switch, Metal Housing, Emergency Stop With Detent Mechanism, Clamping Head for Pull Wire, Indication of Rope Tension, M12 Connector 5-Pin, 4 Switching Contacts, LED Right

Weight:
2.83 LBS
Minimum Purchase:
1 unit
Adding to cart… The item has been added
Euchner rope pull E-stop switch for conveyors and long machine lines
Euchner_136353_Primary.png
Euchner_136353_Primary.png
Description

The Euchner RPS series rope pull switch is an emergency stop device for long machine installations and conveyor lines, allowing a stop signal to be triggered from any point along a tensioned pull wire without installing individual E-stops at short intervals. Pulling the wire, a wire break or the latching E-stop button on the housing actuates the safety contacts and stops the machine; the switch is reset with a pull-to-reset button.

Key Features

  • Emergency stop device with detent mechanism according to EN ISO 13850 and EN 60947-5-5
  • Triggered by pulling the rope, rope breakage or the E-stop button on the housing
  • Center operating position with two switch-off positions
  • Indication of correct rope tension for setup and readjustment
  • Pull-to-reset button
  • RPS-M versions with metal housing
 
Accessories
!
✓