CPCM18-15AO
Capacitive Proximity Sensor, Ø18mm, 2-Wire AC, Non-Flush, 15mm Sensing Range, 100-240VAC, NO, 5-100mA Load, M12 Plug Connector, PBT Housing, Sensitivity Adjustable, Detects Metal, Plastic, Liquid and Grain, IP67
- Weight:
- 0.08 LBS
- Minimum Purchase:
- 1 unit
The Autonics CP Series cylindrical capacitive proximity sensors detect almost any material with a dielectric different from air, including metal, stone, plastic, water and grain. These 2-wire AC models run on 110-220VAC and switch the load directly in normally open or normally closed versions. Long non-flush sensing distances of up to 25mm make the series a practical choice for liquid, powder and grain level detection, object presence and position control on food and beverage lines, plastic material feed systems and agricultural machinery.
Key Features
- Detects conductive and non-conductive materials, including metal, plastic, liquids, powders and grain
- Non-flush mounting with 15mm (Ø18mm) or 25mm (Ø30mm) sensing distance
- 110-220VAC 2-wire models (100-240VAC operating range) in normally open or normally closed versions
- 5-100mA load current with 3mA maximum leakage current and built-in surge protection
- 25Hz response frequency
- Built-in sensitivity adjuster with a green stable-sensing indicator for reliable setup
- 360° ring-type operation indicator for easy status checks from any angle
- Cable models include a 2m Ø4mm cable in standard black PVC or gray oil-resistant PVC (-V) for areas exposed to hydraulic or cutting fluids
- Connector models (CPCM) use an M12 plug connector for quick replacement
- PBT plastic case and nut
- IP67 protection (IEC) for dusty or wet environments
- Operating temperature -25 to 70°C, 35 to 95% RH