CP30-25D-V-IL2
Autonics_CP30_Primary.png
Autonics

CP30-25D-V-IL2

$139.00

Capacitive Proximity Sensor, Ø30mm, IO-Link COM2, Non-Flush, 25mm Sensing Range, 10-30VDC, Push-Pull, NO/NC Configurable, 100mA Output, 2m Oil-Resistant PVC Cable, PBT Housing, Sensitivity Adjustable, Detects Metal, Plastic, Liquid and Grain, IP67

Weight:
0.25 LBS
Minimum Purchase:
1 unit
Adding to cart… The item has been added
IO-Link capacitive sensor for level detection with remote status monitoring
Autonics_CP30_Primary.png
Autonics_CP30_Primary.png
Description

The Autonics CP Series cylindrical capacitive proximity sensors detect almost any material with a dielectric different from air, including metal, stone, plastic, water and grain. These IO-Link models let you monitor sensor status and adjust settings from the controller, which helps simplify commissioning and maintenance. Long non-flush sensing distances of up to 25mm make the series a practical choice for liquid, powder and grain level detection, object presence and position control on food and beverage lines, plastic material feed systems and agricultural machinery.

Key Features

  • Detects conductive and non-conductive materials, including metal, plastic, liquids, powders and grain
  • Non-flush mounting with 8mm (Ø12mm), 15mm (Ø18mm) or 25mm (Ø30mm) sensing distance
  • IO-Link v1.1 (Class A, COM2 38.4kbps) for remote sensor status monitoring and parameter setup
  • Standard I/O (SIO) mode ships as a push-pull, normally open output; normally open or normally closed operation can be set over IO-Link
  • Configurable ON-delay, OFF-delay and one-shot timer functions
  • 10-30VDC supply, 100mA maximum control output with surge, reverse polarity, output short-circuit and reverse output protection
  • 50Hz response frequency
  • Abnormal-detect indicator flashes on hardware faults, setting errors or overcurrent
  • Built-in sensitivity adjuster with a green stable-sensing indicator for reliable setup
  • 360° ring-type operation indicator for easy status checks from any angle
  • Cable models include a 2m Ø4mm cable in standard black PVC or gray oil-resistant PVC (-V) for areas exposed to hydraulic or cutting fluids
  • Connector models (CPCM) use an M12 plug connector for quick replacement
  • PBT plastic case and nut
  • IP67 protection (IEC) for dusty or wet environments
  • Operating temperature -25 to 70°C, 35 to 95% RH
 
Accessories
Check any items you would like to add to your cart, and then tap the ‘Add Selection to Cart’ button.
Add Selection to Cart
Autonics_CP30_Primary.png

Autonics

CP30-25D-IL2

Capacitive Proximity Sensor, Ø30mm, IO-Link COM2, Non-Flush, 25mm Sensing Range, 10-30VDC, Push-Pull, NO/NC Configurable, 100mA Output, 2m PVC Cable, PBT Housing, Sensitivity Adjustable, Detects Metal, Plastic, Liquid and Grain, IP67

$134.00
Autonics_CPCM30_Primary.png

Autonics

CPCM30-25D-IL2

Capacitive Proximity Sensor, Ø30mm, IO-Link COM2, Non-Flush, 25mm Sensing Range, 10-30VDC, Push-Pull, NO/NC Configurable, 100mA Output, M12 Plug Connector, PBT Housing, Sensitivity Adjustable, Detects Metal, Plastic, Liquid and Grain, IP67

$151.00
Autonics_CP30_Primary.png

Autonics

CP30-25DN-V

Capacitive Proximity Sensor, Ø30mm, 3-Wire DC, Non-Flush, 25mm Sensing Range, 10-30VDC, NPN, NO, 200mA Output, 2m Oil-Resistant PVC Cable, PBT Housing, Sensitivity Adjustable, Detects Metal, Plastic, Liquid and Grain, IP67

$91.00
Autonics_CP30_Primary.png

Autonics

CP30-25DP-V

Capacitive Proximity Sensor, Ø30mm, 3-Wire DC, Non-Flush, 25mm Sensing Range, 10-30VDC, PNP, NO, 200mA Output, 2m Oil-Resistant PVC Cable, PBT Housing, Sensitivity Adjustable, Detects Metal, Plastic, Liquid and Grain, IP67

$91.00
Autonics_CP30_Primary.png

Autonics

CP30-25DP2-V

Capacitive Proximity Sensor, Ø30mm, 3-Wire DC, Non-Flush, 25mm Sensing Range, 10-30VDC, PNP, NC, 200mA Output, 2m Oil-Resistant PVC Cable, PBT Housing, Sensitivity Adjustable, Detects Metal, Plastic, Liquid and Grain, IP67

$91.00
Add Selection to Cart
!
✓