-
Weg
CWM180-22-30E10
Contactor, IEC, 180 Amps, 2NO/2NC, 110-130VAC/DC, 3-Pole, UL508, Use RW Overload Relay
$681.75$681.75 -
Weg
CWM250-22-30E10
Contactor, IEC, 250 Amps, 2NO/2NC, 110-130VAC/DC, 3-Pole, UL508, Use RW Overload Relay
$969.60$969.60 -
Weg
CWM250-22-30E13
Contactor, IEC, 250 Amps, 2NO/2NC, 208-250VAC/DC, 3-Pole, UL508, Use RW Overload Relay
$969.60$969.60 -
Weg
CWM630-22-30E35
Contactor, IEC, 630 Amps, 2NO/2NC, 100-127VAC/DC, 3-Pole, UL508, Use RW Overload Relay
$2,252.30$2,252.30 -
$176.75$176.75 -
$210.59$210.59 -
$184.33$184.33 -
Weg
ESW-B50D39A-R71
Enclosed Starter, 50 Amp (50A) CWB Contactor, 480VAC, 50/60Hz, Start/Stop + Reset, 32-50A Overload Range, Three Phase, NEMA 1, Metallic Enclosure, Non-Combination Across the Line Starter, M06 Box Dimensions: 13 x 7.5 x 5.6 (HWD)
$256.71$256.71 -
Weg
ESW-B50V24C-R71
Enclosed Starter, 50 Amp (50A) CWB Contactor, 208-240VAC Coil Voltage, On/Off Selector Switch + Reset, 32-50A O/L Range, 3 Phase NEMA 1 Metallic Enclosure, Non Reversing Non-Combination Across the Line Starter, M06 Box: 13 x 7.5 x 5.6"(HWD)
$285.38$285.38 -
Weg
ESW-B9D15A-R29
Enclosed Starter, 3hp@230V, 9A, 120V Coil, Start/Stop+Reset, NEMA 1, 7-10A Overload Range, 3 Phase, Metallic Enclosure, NEMA 1, Full Voltage, Non-Reversing, Non-Combination
$133.77$133.77 -
Weg
ESW-B9D15E-R29
Enclosed Starter, 3hp@230V, 9A, 120V Coil, Reset Only, NEMA 1, 7-10A Overload Range, 3 Phase, Metallic Enclosure, NEMA 1, Full Voltage, Non-Reversing, Non-Combination
$100.01$100.01 -
Weg
ESW-B9D39E-R25
Enclosed Starter, 0.75hp@230V, 9A, 480V Coil, Reset Only, NEMA 1, 1.8-2.8A Overload Range, 3 Phase, Metallic Enclosure, NEMA 1, Full Voltage, Non-Reversing, Non-Combination
$100.01$100.01
A motor starter is a contactor plus an overload relay; without an overload it is just a contactor.
A motor starter starts and stops a connected motor load and will provide protection in case of a sudden loss of power or if the motor overloads. A contactor is similar to a relay (but can handle larger amounts of electrical power and handle higher voltage loads) and is used for switching current on and off in a circuit. Contactors are used to control electrical loads and motors without providing overload protection.
a.k.a. motor starter, IEC contactor, dp contactor, thermal overload relay, motor protectors