FD300AC
Hot Metal Detector Amplifier, Fiber Type, Low Temperature, 100-220VAC, Solid State Output 0.5A 250VAC/DC, Light ON, 3ms Response, Safety Alarm Output, 5-Level Indicator, IP66, Use with OHA/OHAN/OHW Head and FG Fiber
- Weight:
- 3.31 LBS
- Minimum Purchase:
- 1 unit
The Takex FD300A/FD600A Series fiber-type hot metal detector amplifiers detect the infrared radiation given off by hot steel and other heated materials in steel and heavy-industry processes. An optical head collects the radiation and a heat-resistant fiber optic cable carries it to the remotely mounted amplifier, so no electronics sit near the heat source and no water cooling is needed. FD300A models are designed for low-temperature objects, while FD600A models cover medium- to high-temperature objects.
Key Features
- Fiber-type design with an electronics-free optical head; optical head and fiber rated -25 to 200°C without cooling
- FD300A for low-temperature detection and FD600A for medium- to high-temperature detection
- Choice of mini power relay output (1c, 5A 250VAC, 15ms), signal relay output (1c, 0.5A 48VDC, 5ms) or solid-state output (0.5A 250VAC/DC, 3ms), all Light ON
- Safety alarm relay output warns of reduced light margin caused by lens soiling, misalignment, disturbing light or residual heat
- 5-level received-light indicator and externally accessible sensitivity adjustment simplify setup
- 100-220VAC, 50/60Hz power supply with 10W or less consumption
- Metal-cased amplifier rated -25 to 50°C ambient, IP66 protection
- Standard (Ø50mm/m) and wide field-of-view optical heads available
- Used with separately ordered OHA, OHAN or OHW optical heads, FG fiber optic cables from 2m to 30m, and F38 series airless or air purge hoods