NE-T10R

Photoelectric Sensor, Through Beam, NPN/PNP, Red LED, Light On, 10m Range, cable

Features Include:

• Detection Method: Through beam
• Detection Distance: 10m
• Detection Object: Opaque object of dia.20 min.
• Power Consumption: 2 W or less
• Power Supply: AC/DC24-240V ¬¨¬®¬¨¬±10% 50/60Hz
• Output Mode: Relay output 1c / Rating: 1 A (250 VAC max. resistance load 30 VDC max. resistance load) (*2) (*3)
• Operation Mode: Light ON
• Response Time: 5ms or less
• Operating Angle: 3% (at receiver)
• Light source (light wavelength): Red LED (700 nm)
• Material: Lens: acrylic / Case: heat resistant ABS
• Weight: Transmitter: Approx.150 g / Receiver: Approx.150 g

Power Consumption:

• Transmitter: 1.5 W or less
• Receiver: 2 W or less

Indicator: 

• (Receiver) Operation indicator (red LED)
• Stability indicator (green LED)

Connection:

• Attached cable (Outer dimension: dia.6mm)
• Transmitter: 0.3 mm2 x 2 cores, 2 m, gray
• Receiver: 0.3 mm2 x 5 cores, 2 m, black

Environmental Specifications:

• Ambient Light: 10,000 lx or less
• Ambient Temperature:-25 - +55°C (non-freezing)
• Ambient Humidity: 35 - 85%RH (non-condensing)
• Vibration: 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 directions
• Shock: 500 m/s2 / 3 times each in 3 directions
• Dielectric withstanding: 1,500 VAC for 1 minute
• Insulation resistance: 500 VDC, 100 MΩ or higher

Need More Information?

• Takex NE Series Embedded Amplifier Photo Sensors Datasheet
• Takex Embedded Amplifier Photo Sensor Catalog
• Takex America Inc. Training Manual

Learn 'All About Photoelectric Sensors' Here!