NE2-T50-J2

Photoelectric Sensor,Retroreflective, NPN/PNP, Infrared LED, 50000mm Range, For Logistics, Cable

Features Include:

• Detection Method: Through beam
• Detection Distance: 50m
• Detection Object: ‚âà√¨‚àö√∫21mm or more Opaque
• Current Consumption: Transmitter: 22 mA or less Receiver: 17 mA or less
• Power Supply: 12-24V DC ¬¨¬®¬¨¬±10% / Ripple10% or less
• Output Mode: Relay output 1a / Rating: 2 A (250 VAC) or less resistance load
• Operation Mode: Light ON/Dark ON (with control lead)
• Light emission stop function: Provided (no-voltage input)
• Response Time: 5ms or less
• Operating Angle: 5% (at receiver)
• Light source (light wavelength): Infrared LED (880nm)
• Volume (VR): SENS: sensitivity adjustment (on receiver for through beam type)
• Switch: Dark ON / Light ON selector switch
• Short circuit protection: Output short circuit protection, protection against reverse connection, surge absorber
• Material: Case: Polycarbonate / Lens: acrylic
• Connection: M12 connector (90 degree adjustable)
• Weight: Approx. 26g (transmitter/receiver)

Output Mode:

• NPN / PNP open collector dual output
• Rating : Sink current 100mA, (30 VDC) or less

Indicator: 

• Transmitter: Power indicator (orange LED)
• Receiver: Operation indicator (orange LED)
• Stability indicator (green LED)

Environmental Specifications:

• Ambient Light: 5,000 lx or less
• Ambient Temperature: ‚Äö√Ñ√∂‚àö√ë‚àö¬®25 - +55¬¨¬®‚Äö√†√ªC (storage: -40- +70¬¨¬®‚Äö√†√ªC) (non-freezing)
• Ambient Humidity: 35 - 85%RH (non-condensing)
• Vibration: 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 directions
• Shock: 500 m/s2 / 3 times each in 3 directions
• Dielectric withstanding: 1,000 VAC for 1 minute
• Insulation resistance: 500 VDC, 20 M‚âà√≠¬¨¬© or higher

Need More Information?

• Takex NE2 Series Standard Photo Sensors Datasheet
• Takex America Inc. Training Manual

Learn 'All About Photoelectric Sensors' Here!