F71RPN-J

Fiber Optic Sensor, High Speed, PNP, Red LED, 12/24VDC, M8 Connector, IP40

Features Include:

• Joint installation of up to 8 units - With Anti Interference feature
• High accuracy 8-turn sensitivity adjustment - With position indicator
• 30 μs high speed response - "H" suffix models
• Power Supply: 12 - 24V DC ±10‚àö√Ƭ¨‚à´‚àö√± / Ripple 10% or less
  
• Current Consumption: 40mA or less
• Operation Mode: Light ON/Dark ON selectable
• Timer: Off delay/disabled selectable Delay time: 40 ms fixed
• Light Source: Red LED (680nm)
• Volume (VR): SENS: sensitivity adjustment volume (8-turn without stopper equipped with indicator)
• Display: LCD display with backlight
• Material: Polycarbonate
• Connection:M8 Connector
• Weight: Approx. 25 g

Output Mode: 

• Control output: Open collector output / Rating: Source current 100 mA (30 VDC) or less / Residual voltage: 1 V or less
• Stability output: Open collector output / Rating: Source current 100 mA (30 VDC) or less / Residual voltage: 1 V or less

Indicator: 

• Orange LED: Operation Indicator
• Green LED: Stability Indicator

Response Time: 

• With switch at 4 (turbo function disabled): 250 μs or less
• With switch at 8 (turbo function enabled): 500 μs or less

Switch (SW):

• Light ON/Dark ON selector switch: L.ON for Light ON, D.ON for Dark ON
• Timer selector switch: NOR. for ON/OFF operation, ON.D for on delay (40 ms), OFF.D for off delay (40 ms)
• Mutual Interference prevention/turbo mode selector switch (common)
• 8: Mutual Interference prevention for up to 8 units, turbo function enabled
• 4: Mutual Interference prevention for up to 4 units, turbo function disabled

Environmental Specifications:

• Ambient Light: Incandescent lamp: 10,000 lx / Sunlight: 20,000 lx
• Ambient Humidity: 35 - 85%RH (non-condensing)
• Vibration: 10 - 55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction
• Shock: 100 m/s2 / 3 times each in 3 directions
• Dielectric withstanding: 1000 VAC for 1 minute
• Insulation resistance: 500 DVC, 20MΩ or more

Noise:

• Power supply line: 500 V / Cycle: 10 ms / Pulse duration: 1 μs
• Radiation: 1 kV / Cycle: 10 ms / Pulse duration 1 μs (with noise simulator)

Ambient Temperature:

• 1-3 adjacent units in operation: -25 - +55°C
• 4-10 adjacent units in operation: -25 - +50°C
• 11-16 adjacent units in operation: -25 - +45°C
• Storage: -40 - +70°C (non-freezing)

Need More Information?

• Takex F71 Series Manual Setting Fiber Optic Sensors
• Takex Fiber Optic Sensor Catalog
• Takex America Inc. Training Manual