NextGen Free-Standing Enclosure, Two Door, Right Bay, Provisions for External Disconnect, Left Side Open, 68 x 77.75 x 18" HWD, 0.104" Carbon Steel, SCE-09 Gray, NEMA/UL 3R, 4, 12, NEMA 13, IP66
SKU:
SCE-N68REXD7818
Weight:
705.00 LBS
Minimum Purchase:
1 unit
Modular free-standing enclosure bays for large control panels
The Saginaw NextGen Free-Standing enclosure line is a modular, floor-standing system for housing electrical and electronic controls and instruments. Left, center and right bays can be bolted together in any multiple-door arrangement, and the extra-deep bodies give large control panels more interior room while protecting against dust, dirt, water and oil.
Key Features
Bolts together with other NextGen bays for flexible multiple-door line-ups
Seams continuously welded and ground smooth
Flange trough collar around all sides of the door opening
3-point latching with ramp shoes on the latch rods for easier door closing
Heavy-duty lifting eyes anchored into a reinforced top
Pour-in-place oil and water resistant gasket
Optional panels mount to collar studs, with panel supports and provisions for a light kit
Ground stud on door and body
0.104 in. carbon steel construction
SCE-09 gray powder coat finish
NEMA Type 3R, 4, 12 and 13 rated with IP66 ingress protection
Enclosure, 2-Door Center Bay, Both Sides Open, 80 x 77.75 x 18" HWD, .104" Carbon Steel, ANSI-61 Gray, For Multi-Bay Freestanding Assembly, Subpanel Sold Separately, NEMA/UL 3R, 4, 12, NEMA 13, IP66
Enclosure, 2-Door Right Bay, Left Side Open, 80 x 77.75 x 24" HWD, .104" 304 Stainless Steel, #4 Brushed Finish, Flange-Mount Disconnect Provisions, Subpanel Sold Separately, NEMA/UL 3R, 4, 4X, 12, NEMA 13, IP66
