Saginaw
SCE-12108CHNFSS
Enclosure (CHNF SS), 12.13 x 10 x 8" HWD, 0.063" Stainless Steel 304, #4 Brushed Finish, NEMA/UL 3R, 4, 4X, 12, NEMA 13, IP66, Continuous Hinge Junction Enclosure (304 Stainless Steel)
$454.55
1 available from manufacturer (as of 11/2/2026)
SCE-60K6012SSST
$14,855.37
Sanitary Sloping Top Enclosure, Two Door, 60 x 60 x 12" HWD, 304 Stainless Steel, #4 Brushed, NEMA/UL 3R, 4, 4X, 12, NEMA 13, IP69, IP69K
- Weight:
- 571.00 LBS
- Minimum Purchase:
- 1 unit
Description
The Saginaw Sanitary Sloping Top enclosure is built for high-pressure, high-temperature washdown in food and beverage applications with direct and indirect food contact. Internal swing-out hinges reduce bacteria catch points and maximize back panel space, while a dual-gasket design pairs an inner pour-in-place gasket with an easily replaceable FDA-grade silicone outer gasket.
Key Features
- 304 stainless steel with seams continuously welded and ground smooth
- 15 degree sloped top
- Internal swing-out hinges
- Stainless sanitary quarter turn latches with FDA-grade silicone gaskets
- FDA-grade silicone outer gasket
- Provision for mounting optional panels
- Ground stud on door and body
- DIN 40050-9 IP69K rated
- #4 brushed finish on exterior surfaces
- NEMA Type 3R, 4, 4X, 12 and 13 rated with IP69 and IP69K ingress protection
- Two-door design
- Doors open 110 degrees
Certifications
- UL Listed, Type 3R, 4, 4X and 12
- CSA, Type 4, 4X and 12
- NSF 169 (Special Purpose Food Equipment and Devices)
- 3-A 00-01 Sanitary Standard for General Requirements
Accessories
Check any items you would like to add to your cart, and then tap the ‘Add Selection to Cart’ button.
Saginaw
SCE-12106CHNFSS
Enclosure (CHNF SS), 12.13 x 10 x 6" HWD, 0.063" Stainless Steel 304, #4 Brushed Finish, NEMA/UL 3R, 4, 4X, 12, NEMA 13, IP66, Continuous Hinge Junction Enclosure (304 Stainless Steel)
$426.55
Saginaw
SCE-102298
Bolt Pack, Subpanel 3, 8-16, 1.5 x 1.5 x 0.5", NEMA/UL N/A, Sold in Packs of 4, Price/Sold is per Pack
$6.73
$3.38
Saginaw
SCE-10PBAI
Sloping Front Pushbutton Enclosure (PBAI), 10 Hole (22.5mm Diameter), 7.25 x 13 x 6.75" HWD, Wall Mount, 0.063" Carbon Steel, ANSI-61 Gray, with Mounting Foot Kit SCE-ELJMFK, NEMA/UL 4, 12, NEMA 13, IP66, Sloping Front 22.5mm Pushbutton Enclosure
$191.59