KL50
KL50
Transmitter Half Of KLR50

Product image is representative only, please verify specifications.

Takex

KL50

$719.13

Transmitter Half Of KLR50

Minimum Purchase:
1 unit
Adding to cart… The item has been added
KL50
Transmitter Half Of KLR50
KL50
Transmitter Half Of KLR50
Description
Transmitter Half Of KLR50,

Features Include:

  • Robust and light weight case
    Robust case capable of withstanding severe operating conditions such as heat, water and shock also offering light weight is employed.
  • Fully prepared for external light disruption
    Unique circuitry ensures stable operation and high reliability under red-hot steel material of over 1,000 C
  • Excellent stability
    Received optical output about ten fold of operation level at detecting distance of 50 m ensures detection even with minor soiling of lens or in adverse environment.
  • Optical sight convenient for alignment
    Both transmitter and receiver are provided with optical sight that facilitates optical axis alignment
  • Attachable airless dust hood or air purge hood
    Different types of airless dust hoods and air purge hoods are available for prevention of soiling of lens, etc.
  • Light Source: Infrared LED
  • Detection Method: Through-Beam
  • Power Supply: AC100-110V/200-220V ±10% 50/60Hz
  • Power Consumption: 4W or less
  • Operation Mode: Light ON
  • Detection Distance: 50m max.
  • Output Type: Relay Output
  • Operating Angle: 5° min.
  • Resistance to External Light: 300,000 lx
  • Response Time: 25ms or less
  • Indicator: Light reception indicator (red LED)
  • Sensitivity Adjustment: Adjustable with volume
  • Ambient Humidity: 35-85%RH (non-freezing, non-condensing)
  • Insulation Resistance: 500 VDC 20MΩ or more (between primary side of transformer/output terminal and case)
  • Dielectric Withstanding: 1,500 VAC for 1 minute (between primary side of transformer/Output Terminal & Case)
  • Vibration: 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 direction
  • Shock: 500 m/s2 / twice each in 3 directions
  • Case Material: Aluminum die cast
  • Connection: Terminal block (cable opening : Ground hub)

Indication:

  • Transmitter: Power Indicator (Red LED)
  • Receiver: Light Reception Indicator (Red LED)

Cooling Water Specification:

  • Flow Rate: 2L/minute or more
  • Temperature: ‚àö√Ƭ¨‚à´‚àö¬£10°C - ‚àö√Ƭ¨‚à´‚àö¬£35‚Äö√Ñ√∂‚àö√´‚àö√¢
  • Withstand Voltage: 0.29MPa
Accessories
!
✓