-
Weg
CWM105-00-30C34
IEC Contactor, 105 Amp (105A), 24-28VDC, 3NO Main Contact, UL508, 117 x 75 x 126mm (4.61 x 2.95 x 4.96") (HWD), Use RW Overload Relay
$272.70$272.70 -
Weg
CWM25-00-20V18
IEC Contactor, 25 Amp (25A), 2NO Main Contact, 110-130VAC, 50Hz/60Hz-DC, Screw Terminal, IP20 Main/Control Circuit, 81 x 45 x 87mm (3.19 x 1.77 x 3.43") (HWD)
$50.00$50.00 -
$136.35$136.35 -
$184.33$184.33 -
Weg
ESW-B25D39E-R33
Enclosed Starter, 7.5hp@230V, 25 Amp (25A), 480V Coil, Reset Only, 15-23A (RW27) Overload Range, 3 Phase, NEMA 1 Metallic Enclosure, Full Voltage, Non-Reversing, Non-Combination
$142.05$142.05 -
Weg
ESW-B65D15A-R72
Enclosed Starter, 120V, 50/60Hz Control Voltage, 65A (CWB65), 40-57 A (RW67) Overload Relay, A-On-Off Button, Direct Three Phase, Metallic Crate, Type 1
$272.64$272.64 -
Weg
ESW-B65V24E-R72
Enclosed Starter, 65 Amp (65A) CWB Contactor, 208-240VAC Coil Voltage, Reset Only, 40-57A O/L Range, 3 Phase. NEMA 1, Metallic Enclosure, Non Reversing Non-Combination Across the Line Starter, M06 Box: 13 x 7.5 x 5.6 (HWD)
$238.88$238.88 -
Weg
ESWE-B18D39KX-D11
Enclosed Starter for 5hp@200V, 5hp@230V, 10hp@460V, 15hp@575V Maximum hp 3-Phase Motor, 18 Amp CWB Contactor, 480VAC Coil Voltage without CPT, 50/60Hz, 10 - 16 Amp MPW40 Overload Relay
$586.25$586.25 -
Weg
ESWE-B25V24KX-D12
Enclosed Starter for 7-1/2hp@200V, 7-1/2hp@230V, 15hp@460V, 15hp@575V Maximum hp 3-Phase Motor, 25 Amp CWB Contactor, 208-240VAC Coil Voltage without CPT, 60Hz, 16 - 20 Amp MPW40 Overload Relay
$513.00$513.00 -
Weg
ESWF-25V24N4-D12
Enclosed Starter, 7.5hp/200V, 7.5hp/230V, 15hp/460V, 15hp/575V, 208-240VAC Coil Voltage, 16-20A O/L Range, Wall Mount, Type 4/12 Metallic Enclosure, HOA-Start/Stop/Reset, Circuit Breaker Rotary Handle Disconnect, FVNR Across the Line
$910.65$910.65 -
Weg
ESWS-B18D15A-RM32
Enclosed Starter, 18A, Start/Stop + Reset , 11-17A Overload Range, Single Phase, Metallic Enclosure, NEMA 1, Full Voltage, Non-Reversing, Non-Combination
$142.05$142.05 -
Weg
ESWS-B9D15E-RM29
Enclosed Starter, 9A, Reset Only, 7-10A Overload Range, Single Phase, Metallic Enclosure, NEMA 1, Full Voltage, Non-Reversing, Non-Combination
$86.00$86.00
A motor starter is a contactor plus an overload relay; without an overload it is just a contactor.
A motor starter starts and stops a connected motor load and will provide protection in case of a sudden loss of power or if the motor overloads. A contactor is similar to a relay (but can handle larger amounts of electrical power and handle higher voltage loads) and is used for switching current on and off in a circuit. Contactors are used to control electrical loads and motors without providing overload protection.
a.k.a. motor starter, IEC contactor, dp contactor, thermal overload relay, motor protectors