-
Available Now! 
Available Now!Weg
CWB80-11-30C03
IEC Contactor, 80 Amp (80A), 1NO/1NC Auxiliary Contacts, 3NO, 24VDC, Screw Terminal, UL508
$192.24$192.24 -
Weg
CWC012-10-30V18
Mini Contactor, 12 Amp, 1NO Auxiliary Contact, 3NO Power Poles, 110VAC, 50Hz/120VAC, 60Hz, Screw Terminal, IP20, 2.28 x 1.77 x 2.05" (HWD), CWC Series
$21.76$21.76 -
Weg
CWC016-10-30C03
Mini Contactor, 16 Amp, 1NO Auxiliary Contacts, 3NO Power Poles, 24VDC, Screw Terminal, IP20, 2.28 x 1.77 x 2.05" (HWD), CWC Series
$27.73$27.73 -
Weg
CWC09-01-30L03
Mini Contactor, 9 Amp, 1NC Auxiliary Contacts, 3NO Power Poles, 24VDC (LC), Screw Terminal, IP20, 2.28" x 1.77" x 2..05" (HWD), CWC Series
$23.87$23.87 -
Weg
CWC09-10-30V18
Mini Contactor, 9 Amp, 1NO Auxiliary Contact, 3NO Power Poles, 110VAC, 50Hz/120VAC, 60Hz, Screw Terminal, IP20, 2.28 x 1.77 x 2.05" (HWD), CWC Series
$18.25$18.25 -
$52.02$52.02 -
$59.59$59.59 -
Weg
CWM40-11-30V04
IEC Contactor, 40 Amp (40A), 3NO Main Contact, 1NO/1NC Auxiliary Contacts, 24VAC, 60Hz, Screw Terminal, IP10 Main Circuit, IP20 Control Circuit, 89 x 55 x 98mm (3.50 x 2.17 x 3.86") (HWD)
$92.92$92.92 -
Weg
ESW-B9D15A-R24
Enclosed Starter, 1hp@460V, 9 Amp (9A), 120V Coil, Start/Stop+Reset, 1.2-1.8A (RW27) Overload Range, 3 Phase, NEMA 1 Metallic Enclosure, Full Voltage, Non-Reversing, Non-Combination
$133.77$133.77 -
Weg
ESW-B9V24E-R27
Enclosed Starter, 1.5hp@230V, 9 Amp (9A), 208-240V Coil, Reset Only, 4-6.3A (RW27) Overload Range, 3 Phase, NEMA 1 Metallic Enclosure, Full Voltage, Non-Reversing, Non-Combination
$100.01$100.01 -
Weg
ESWC-65TM1A9-RE6
Enclosed Combination Starter, Non-Reversing, VAC:208/10-20hp|240/10-20hp|480/25-40hp, 28-112 OL
$1,709.84$1,709.84 -
Weg
ESWE-B18D15KX-D11
Enclosed Starter for 5hp@200V, 5hp@230V, 10hp@460V, 15hp@575V Maximum hp 3-Phase Motor, 18 Amp CWB Contactor, 120VAC Coil Voltage without CPT, 50/60Hz, 10 - 16 Amp MPW40 Overload Relay
$586.25$586.25
A motor starter is a contactor plus an overload relay; without an overload it is just a contactor.
A motor starter starts and stops a connected motor load and will provide protection in case of a sudden loss of power or if the motor overloads. A contactor is similar to a relay (but can handle larger amounts of electrical power and handle higher voltage loads) and is used for switching current on and off in a circuit. Contactors are used to control electrical loads and motors without providing overload protection.
a.k.a. motor starter, IEC contactor, dp contactor, thermal overload relay, motor protectors