-
$54.96$54.96 -
Weg
CWM40-11-30V04
IEC Contactor, 40 Amp (40A), 3NO Main Contact, 1NO/1NC Auxiliary Contacts, 24VAC, 60Hz, Screw Terminal, IP10 Main Circuit, IP20 Control Circuit, 89 x 55 x 98mm (3.50 x 2.17 x 3.86") (HWD)
$85.71$85.71 -
Weg
ESW-B9D15A-R24
Enclosed Starter, 1hp@460V, 9 Amp (9A), 120V Coil, Start/Stop+Reset, 1.2-1.8A (RW27) Overload Range, 3 Phase, NEMA 1 Metallic Enclosure, Full Voltage, Non-Reversing, Non-Combination
$133.77$133.77 -
Weg
ESW-B9V24E-R27
Enclosed Starter, 1.5hp@230V, 9 Amp (9A), 208-240V Coil, Reset Only, 4-6.3A (RW27) Overload Range, 3 Phase, NEMA 1 Metallic Enclosure, Full Voltage, Non-Reversing, Non-Combination
$100.01$100.01 -
Weg
ESWC-65TM1A9-RE6
Enclosed Combination Starter, Non-Reversing, VAC:208/10-20hp|240/10-20hp|480/25-40hp, 28-112 OL
$1,626.02$1,626.02 -
Weg
ESWE-B18D15KX-D11
Enclosed Starter for 5hp@200V, 5hp@230V, 10hp@460V, 15hp@575V Maximum hp 3-Phase Motor, 18 Amp CWB Contactor, 120VAC Coil Voltage without CPT, 50/60Hz, 10 - 16 Amp MPW40 Overload Relay
$557.52$557.52 -
Weg
ESWE-B9D15KX-D08
Enclosed Starter for 3/4hp@200V, 1hp@230V, 2hp@460V, 3hp@575V Maximum hp 3-Phase Motor, 9 Amp CWB Contactor, 120VAC Coil Voltage without CPT, 50/60Hz, 2.5 - 4.0 Amp MPW40 Overload Relay
$544.78$544.78 -
Weg
ESWE-B9V24KX-D10
Enclosed Starter for 3hp@200V, 3hp@230V, 5hp@460V, 7-1/2hp@575V Maximum hp 3-Phase Motor, 9 Amp CWB Contactor, 208-240VAC Coil Voltage without CPT, 60Hz, 6.3 - 10 Amp MPW40 Overload Relay
$493.05$493.05 -
Weg
ESWS-B18D15A-RM31
Enclosed Starter, 18A, Start/Stop + Reset , 10-15A Overload Range, Single Phase, Metallic Enclosure, NEMA 1, Full Voltage, Non-Reversing, Non-Combination
$136.97$136.97 -
Available Now! 
Available Now!Weg
ESWS-B50V24E-RM71
Enclosed Starter, 50 Amp (50A) CWB Contactor, 208-240VAC, Reset Only, 32-50A O/L Range, Single Phase, NEMA 1, Metallic Enclosure, Non Reversing Non-Combination Across the Line Starter, M06 Box: 13 x 7.5 x 5.6 (HWD)
$210.21$210.21 -
$109.67$109.67 -
$50.84$50.84
A motor starter is a contactor plus an overload relay; without an overload it is just a contactor.
A motor starter starts and stops a connected motor load and will provide protection in case of a sudden loss of power or if the motor overloads. A contactor is similar to a relay (but can handle larger amounts of electrical power and handle higher voltage loads) and is used for switching current on and off in a circuit. Contactors are used to control electrical loads and motors without providing overload protection.
a.k.a. motor starter, IEC contactor, dp contactor, thermal overload relay, motor protectors