-
Weg
ESWE-B9V24KX-D06
11136066
Enclosed Starter for 1/4hp@200V, 1/3hp@230V, 3/4hp@460V, 1hp@575V Maximum hp 3-Phase Motor, 9 Amp CWB Contactor, 208-240VAC Coil Voltage without CPT, 60Hz, 1.0 - 1.6 Amp MPW40 Overload Relay
-
Weg
CWC07-10-30C03
12486689
Mini Contactor, 7 Amp, 1NO Auxiliary Contacts, 3NO Power Poles, 24VDC, Screw Terminal, IP20, 2.28" x 1.77" x 2..05" (HWD), CWC Series
-
Weg
CWCA0-04-00V24
12680559
Mini Contactor Control Relay, 10 Amp, No Main Contacts, 180-208V 50Hz/208-240V 60Hz, Screw Terminal, IP20, 2.28 x 1.77 x 2.05" (HWD), CWC Series
-
Weg
CWC016-00-40L02
13181254
Mini Contactor, 16 Amp, 4NO Power Poles, 12VDC (LC), Screw Terminal, IP20, 2.28 x 1.77 x 2.05" (HWD), CWC Series
-
Weg
CWC07-10-30C02
12942644
Mini Contactor, 7 Amp, 1NO Auxiliary Contacts, 3NO Power Poles, 12VDC, Screw Terminal, IP20, 2.28" x 1.77" x 2..05" (HWD), CWC Series
-
Weg
CWCA0-04-00V18
12680510
Mini Contactor Control Relay, 10 Amp, No Main Contacts, 110V 50Hz/120V 60Hz, Screw Terminal, IP20, 2.28 x 1.77 x 2.05" (HWD), CWC Series
-
Weg
CWC016-00-40C12
13560646
Mini Contactor, 16 Amp, 4NO Power Poles, 110VDC, Screw Terminal, IP20, 2.28 x 1.77 x 2.05" (HWD), CWC Series
-
Weg
ESWE-B9D39KX-D09
11136100
Enclosed Starter for 1-1/2hp@200V, 1-1/2hp@230V, 3hp@460V, 5hp@575V Maximum hp 3-Phase Motor, 9 Amp CWB Contactor, 480VAC Coil Voltage without CPT, 50/60Hz, 4.0 - 6.3 Amp MPW40 Overload Relay
-
Weg
CWC07-01-30V56
12679924
Mini Contactor, 7 Amp, 1NC Auxiliary Contacts, 3NO Power Poles, 500V 50Hz/600V 60Hz, Screw Terminal, IP20, 2.28" x 1.77" x 2..05" (HWD), CWC Series
-
Weg
CWCA0-04-00V10
12680496
Mini Contactor Control Relay, 10 Amp, No Main Contacts, 42V 50Hz/48V 60Hz, Screw Terminal, IP20, 2.28 x 1.77 x 2.05" (HWD), CWC Series
-
Weg
ESWE-B9D39KX-D08
11136099
Enclosed Starter for 3/4hp@200V, 1hp@230V, 2hp@460V, 3hp@575V Maximum hp 3-Phase Motor, 9 Amp CWB Contactor, 480VAC Coil Voltage without CPT, 50/60Hz, 2.5 - 4.0 Amp MPW40 Overload Relay
-
Weg
CWC07-01-30V47
12679915
Mini Contactor, 7 Amp, 1NC Auxiliary Contacts, 3NO Power Poles, 400-415V 50Hz/480V 60Hz, Screw Terminal, IP20, 2.28" x 1.77" x 2..05" (HWD), CWC Series
A motor starter is a contactor plus an overload relay; without an overload it is just a contactor.
A motor starter starts and stops a connected motor load and will provide protection in case of a sudden loss of power or if the motor overloads. A contactor is similar to a relay (but can handle larger amounts of electrical power and handle higher voltage loads) and is used for switching current on and off in a circuit. Contactors are used to control electrical loads and motors without providing overload protection.
a.k.a. motor starter, IEC contactor, dp contactor, thermal overload relay, motor protectors