-
Weg
CWM18-00-20V04
Contactor, IEC, 18 Amp (18A), 2NO, 20V 50Hz/24VAC 60 Hz, Screw Terminal, 81 x 45 x 87mm (3.19 x 1.77 x x 3.43"), IP20, CWM Series
$31.39$31.39 -
Weg
CWM95N-00-30V18
Contactor, 95A (N), 3NO, 110V 50Hz / 120V 60Hz, Screw Terminal Type, 4.61 x 2.95 x 4.96" (HWD)
$165.12$165.12 -
Weg
CWM250-22-30E02
Contactor, IEC, 250 Amps, 2NO/2NC, 24-28VAC/DC, 3-Pole, UL508, Use RW Overload Relay
$825.60$825.60 -
$30.96$30.96
-
$50.74$50.74
-
Weg
CWM800-22-30E39
Contactor, IEC, 800 Amps, 2NO/2NC, 200-240VAC/DC, 3-Pole, UL508, Use RW Overload Relay
$2,807.90$2,807.90 -
$50.74$50.74
-
Weg
CWM800-22-30E35
Contactor, IEC, 800 Amps, 2NO/2NC, 100-127VAC/DC, 3-Pole, UL508, Use RW Overload Relay
$2,807.90$2,807.90 -
$50.74$50.74
-
Weg
CWM800-22-30D82
Contactor, IEC, 800 Amps, 2NO/2NC, 440-575VAC, 3-Pole, UL508, Use RW Overload Relay
$2,807.90$2,807.90 -
$50.74$50.74
-
Available Now! Available Now!Weg
CWM18-10-30V47
Contactor, IEC, 18 Amps, 1NO, 480VAC, 3-Pole, UL508, Use RW Overload Relay
$44.29$44.29
A motor starter is a contactor plus an overload relay; without an overload it is just a contactor.
A motor starter starts and stops a connected motor load and will provide protection in case of a sudden loss of power or if the motor overloads. A contactor is similar to a relay (but can handle larger amounts of electrical power and handle higher voltage loads) and is used for switching current on and off in a circuit. Contactors are used to control electrical loads and motors without providing overload protection.
a.k.a. motor starter, IEC contactor, dp contactor, thermal overload relay, motor protectors