Alt: ICS Series
Inductive Proximity Sensor, M12 Stainless Steel, M12 Plug, 4mm Range, Non-Flush, PNP NO Output, Supply Voltage 10-36VDC, Max Output Current 200mA, Max Switching Frequency 2 kHz, Operating Temperature -40C - +80C, IP67, IP68, IP69K, Ecolab,
Carlo Gavazzi's E1-Rated ICS series of inductive proximity sensors were specifically designed for the challenging applications on mobile equipment.
These sensors offer unrivaled performance focusing on reliable detection and reduced downtime.
E1-approved inductive sensors give you accurate and reliable detection of actuating parts such as hydraulic pistons, gear speed, crane position and movement on refuse vehicles, mobile cranes, concrete mixers, tractors, fire trucks, harvesting equipment, buses, forklifts, and more.
These mobile platforms are typically exposed to high levels of shock and vibration from the terrain, exposure to salt and debris from the road and vehicle engine refuse gases, extreme voltage peaks if a battery is disconnected from the alternator, wide operating temperature ranges due to the environment and proximity to engines and exhaust systems, and electromagnetic interferences generated by radio transmitters.
What is an E1 Certified Sensor?
On mobile equipment, sensors must operate in very low ambient temperatures as well as very high operating temperatures (heat from engines and exhaust systems). Thanks to their special design, Carlo Gavazzi E1 sensors can operate continuously between -40°C to +85°C (-40° to +185°F).
Additional features:
Features Include:
Technical Information:
E1-Rated Inductive Proximity Sensors from CARLO GAVAZZI:
Carlo Gavazzi
Inductive Proximity Sensor, M12 Stainless Steel, M12 Plug, 8mm Range, Non-Flush, PNP NO Output, Supply Voltage 10-36VDC, Max Output Current 200mA, Max Switching Frequency 2 kHz, Operating Temperature -40C - +80C, IP67, IP68, IP69K, Ecolab,
Carlo Gavazzi
Inductive Proximity Sensor, M12 Stainless Steel, M12 Plug, 8mm Range, Non-Flush, NPN, NO, Supply Voltage 10-36VDC, Max Output Current 200mA, Max Switching Frequency 2 kHz, Operating Temperature -40C - +80C, IP67, IP68, IP69K, Ecolab, 30H x
Hitachi Drives
Encoder Feedback Option (5V Differential Line Driver Input), Use with SJ-P1 Drives
Carlo Gavazzi
Inductive Proximity Sensor, M12 Stainless Steel, M12 Plug, 4mm Range, Flush, NPN, NO, Supply Voltage 10-36VDC, Max Output Current 200mA, Max Switching Frequency 2 kHz, Operating Temperature -40C - +80C, IP67, IP68, IP69K, Ecolab, 30H x 260W
Patlite
Light Tower Ø70mm, Red/Amber/Green, Silver, Steady/Flashing/Alarm LED, 24VDC, Direct Mount, Lead Wires, IP54