CST-R80

Color Sensor, Passive, Color Identification, NPN, RGB Color, 50mA Or Less, 5mm Detect, Cable 2mm

Features Include:

• Detection Method: RGB color composition / Brightness (RGB light receiving element)
• Power Supply: 12-24V DC ±10% / Ripple 10% or less
• Current Consumption: 50mA or less
• Teaching Standard Color: 1 Color
• External input for teaching: No voltage input (contact / no contact)
• Output Mode: NPN open collector output, Sink current 50mA(DC30V) or less, residual voltage : 2V
• Operation Mode: Conformity ON or OFF selectable
• Time Delay: Selectable between On delay, Off delay and timer disabled Delay time : 250ms fixed
• Response Time: 50ms or less when lights up / 100ms or less when lights down *1
• Display: 1 orange digit indicator + 3 red digit indicator
• Circuit Protection: Short Circuit Protection
• Material: Polycarbonate
• Connection:  Cable type (outer dimension: dia. 3.7mm) 0.2 mm2 5 cores, 2 m (black)v
• Weight: Approx. 60g (Including 2m cable and bracket)b
• Ambient Light: 1000 lx or less (must be stable)b
• Ambient Temperature: +10 - +40C
• Ambient Humidity: 35-85%RH (non-condensing)b
• Vibration: 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 directionb
• Shock: 500 m/s2  / 3 times each in 3 directions

Switches:

• (+),(-) Push button switch: select Mode/teaching/change setting value/select channel
  
• Select switch: select RUN/SELECT/SET

Output: 

• Output 1: Color (RGB) value
• Output 2: Brightness

Indicator:

• Operation indicator: "OP" LED lights when output is ON
• Level indicator: "H" LED lights when light intensity is excessive
• Level indicator: "L" LED lights when light intensity is not enough