-
Weg
CWM25-00-20V24
Contactor, IEC, 25 Amps, 2NO, 180-208V 50Hz, 208-240V 60Hz, Screw Terminal, 81 x 45 x 87mm, 3.19 x 1.77 x 3.43" (HWD), IP20
$42.57$42.57 -
Weg
CWM40-11-30V24
IEC Contactor, 40 Amp (40), 3NO + 1NO/1NC Auxiliary Contacts, 208-240VAC, 60Hz, Screw Terminal, CWM Series, Use RW Overload Relay
$79.73$79.73 -
Weg
CWM250-22-30E21
Contactor, IEC, 250 Amp (250A), 2NO/2NC, 430-500VAC/DC, 3 Pole, UL508, Use RW Overload Relay
$825.60$825.60 -
Weg
CWM18-00-20V04
Contactor, IEC, 18 Amp (18A), 2NO, 20V 50Hz/24VAC 60 Hz, Screw Terminal, 81 x 45 x 87mm (3.19 x 1.77 x x 3.43"), IP20, CWM Series
$31.39$31.39 -
$122.12$122.12
-
Weg
CWM40-11-30V04
Contactor Only, IEC, 40 Amp, 1NO/1NC, 24VAC, 60Hz, Buy CWMxx-00-xxxxx & Contact Block Separately
$79.12$79.12 -
$70.52$70.52
-
Weg
CWM150N-22-30E10
Contactor, 150A (N), 3NO, 110-130V 50/60Hz-DC, Screw Terminal Type, 6.4 x 4.65 x 5.49" (HWD)
$580.50$580.50 -
Weg
CWM95N-00-30V18
Contactor, 95A (N), 3NO, 110V 50Hz / 120V 60Hz, Screw Terminal Type, 4.61 x 2.95 x 4.96" (HWD)
$165.12$165.12 -
Weg
CWM250-22-30E02
Contactor, IEC, 250 Amps, 2NO/2NC, 24-28VAC/DC, 3-Pole, UL508, Use RW Overload Relay
$825.60$825.60 -
$30.96$30.96
-
$50.74$50.74
A motor starter is a contactor plus an overload relay; without an overload it is just a contactor.
A motor starter starts and stops a connected motor load and will provide protection in case of a sudden loss of power or if the motor overloads. A contactor is similar to a relay (but can handle larger amounts of electrical power and handle higher voltage loads) and is used for switching current on and off in a circuit. Contactors are used to control electrical loads and motors without providing overload protection.
a.k.a. motor starter, IEC contactor, dp contactor, thermal overload relay, motor protectors