-
Weg
ESWX-25V47E79-R29
Motor Starter, XP, Explosion Proof, 3hp@460V, 25A, 480V Coil, 3 Phase, Reset Only, NEMA 7/9, 7-10A Overload Range
$1,852.50$1,852.50 -
Weg
ESWX-25V47E79-R27
Motor Starter, XP, Explosion Proof, 3hp@460V, 25A, 480V Coil, 3 Phase, Reset Only, NEMA 7/9, 4-6.3A Overload Range
$1,852.50$1,852.50 -
Weg
ESWX-25V47A79-R29
Motor Starter, XP, Explosion Proof, 3hp@460V, 25A, 480V Coil, 3 Phase, Start/Stop+Reset, NEMA 7/9, 7-10A Overload Range
$2,194.50$2,194.50 -
Weg
ESWX-25V47A79-R27
Motor Starter, XP, Explosion Proof, 3hp@460V, 25A, 480V Coil, 3 Phase, Start/Stop+Reset, NEMA 7/9, 4-6.3A Overload Range
$2,194.50$2,194.50 -
Weg
ESWE-B9D39KX-D10
Enclosed Starter for 3hp@200V, 3hp@230V, 5hp@460V, 7-1/2hp@575V Maximum hp 3-Phase Motor, 9 Amp CWB Contactor, 480VAC Coil Voltage without CPT, 50/60Hz, 6.3 - 10 Amp MPW40 Overload Relay
$467.10$467.10 -
Weg
ESWF-9V47N4-D09
Enclosed Starter, 1.5hp/200V, 1.5hp/230V, 3hp/460V, 5hp/575V, 480VAC Coil Voltage, 4.0-6.3A O/L Range, Wall Mount, Type 4/12 Metallic Enclosure, HOA-Start/Stop/Reset, Circuit Breaker Rotary Handle Disconnect, FVNR Across the Line Starter
$698.25$698.25 -
Weg
PESW-B9D39EX-R60
Enclosed Starter, 1hp@230V / 2hp@460V / 3hp@575V, 9A, 480V Coil, Reset Only, 2.8-4A Overload Range, 3 Phase, Non-Metallic Enclosure, NEMA 4X, Full Voltage, Non-Reversing, Non-Combination
$78.29$78.29 -
Available Now! Available Now!Weg
PESW-B9D39AX-R60
Enclosed Starter, 1hp@230V / 2hp@460V / 3hp@575V, 9A, 480V Coil, Start / Stop+Reset, 4X, 2.8-4A Overload Range, 3 Phase, Non-Metallic Enclosure, NEMA 4X, Full Voltage, Non-Reversing, Non-Combination
$104.72$104.72
A motor starter is a contactor plus an overload relay; without an overload it is just a contactor.
A motor starter starts and stops a connected motor load and will provide protection in case of a sudden loss of power or if the motor overloads. A contactor is similar to a relay (but can handle larger amounts of electrical power and handle higher voltage loads) and is used for switching current on and off in a circuit. Contactors are used to control electrical loads and motors without providing overload protection.
a.k.a. motor starter, IEC contactor, dp contactor, thermal overload relay, motor protectors