-
Weg
ESWS-B12V24A-RM30
Enclosed Starter, 12A, 208-240VCoil, Start/Stop + Reset , 8-12A Overload Range, Single Phase, Metallic Enclosure, NEMA 1, Full Voltage, Non-Reversing, Non-Combination
$115.56$115.56 -
Weg
ESWS-B12V24E-RM30
Enclosed Starter, 12A, 208-240VCoil, Reset Only, 8-12A Overload Range, Single Phase, Metallic Enclosure, NEMA 1, Full Voltage, Non-Reversing, Non-Combination
$86.94$86.94 -
Available Now! Available Now!Carlo Gavazzi
CGMS-12A-240-10
Mini-Contactor, 12A, 240VAC, Screw Clamp, 1NO, Manufacturer Minimum Order 20 Pieces, Price per Piece, Non-Cancellable, No Returns
$32.00$32.00 -
$32.38$32.38
-
$21.61$21.61
-
$24.67$24.67
-
Weg
PESW-B12V24AX-R64
Enclosed Starter, 12 Amp (12A) CWB Contactor, 208-240VAC Coil Voltage, Start/Stop, 8-12.5A Overload Range, 3 Phase, NEMA 4X, Non-Metallic, Non Reversing Non-Combination Across the Line Starter, M04 Box: 9.5 x 5.5 x 5.0"(HWD)
$122.58$122.58 -
Weg
PESW-B12V24EX-R64
Enclosed Starter, 12 Amp (12A) CWB Contactor, 208-240VAC Coil Voltage, Reset Only, 8-12.5A Overload Range, 3 Phase, NEMA 4X, Non-Metallic, Non Reversing Non-Combination Across the Line Starter, M04 Box: 9.5 x 5.5 x 5.0"(HWD)
$93.96$93.96 -
Weg
CWC012-01-30V24-X50
Mini Contactor, 12 Amp, 1NC Auxiliary Contacts, 3NO Power Poles, 180-208V 50Hz/208-240V 60Hz, Screw Terminal, IP20, 2.28 x 1.77 x 2.05" (HWD), CWC Series
$18.60$18.60 -
Weg
CWC012-10-30V24
Mini Contactor, 12 Amp, 1NO Auxiliary Contacts, 3NO Power Poles, 180-208V 50Hz/208-240V 60Hz, Screw Terminal, IP20, 2.28 x 1.77 x 2.05" (HWD), CWC Series
$18.03$18.03 -
Weg
CWC012-01-30V24
Mini Contactor, 12 Amp, 1NC Auxiliary Contacts, 3NO Power Poles, 180-208V 50Hz/208-240V 60Hz, Screw Terminal, IP20, 2.28 x 1.77 x 2.05" (HWD), CWC Series
$18.03$18.03 -
Weg
CWC012-00-40V24
Mini Contactor, 12 Amp, 4NO Power Poles, 180-208V 50Hz/208-240V 60Hz, Screw Terminal, IP20, 2.28 x 1.77 x 2.05" (HWD), CWC Series
$18.60$18.60
A motor starter is a contactor plus an overload relay; without an overload it is just a contactor.
A motor starter starts and stops a connected motor load and will provide protection in case of a sudden loss of power or if the motor overloads. A contactor is similar to a relay (but can handle larger amounts of electrical power and handle higher voltage loads) and is used for switching current on and off in a circuit. Contactors are used to control electrical loads and motors without providing overload protection.
a.k.a. motor starter, IEC contactor, dp contactor, thermal overload relay, motor protectors