-
Noark
EX9CS09D01B
IEC Contactor, Miniature, 24VDC, 9 Amp (9A), 1NC/3NO, DIN Rail 35mm & Panel Mountable, FVNR: Full Voltage, Non-Reversing, UL508, EX9CS Series
$16.58$16.58 -
Noark
EX9C400F22K
Contactor, Ex9C, Standard, FVNR, 400A, Wide Range Operating VAC/DC, 2NO/2NC, 100-250V, 3NO
$727.60$727.60 -
Noark
EX9RD36A36
Overload Relay, Use with 25/32A Standard, 28-36A, NR2-36G 28-36A, Use with EX9CDS/EX9CDR Contactors
$47.74$47.74 -
Available Now! Available Now!Noark
EX9RD36A32
Overload Relay, Use with 25/32A Standard, 23-32A, NR2-36G 23-32A, Use with EX9CDS/EX9CDR Contactors
$47.74$47.74 -
Available Now! Available Now!Noark
EX9RD25A8
Overload Relay, Use with 9/12/18/25A Std, 5.5-8A, NR2-25G 5.5-8A, Use with EX9CDS/EX9CDR Contactors
$24.79$24.79 -
Available Now! Available Now!Noark
EX9RD25A6
Overload Relay, Use with 9/12/18/25A Std, 4-6A, NR2-25G 4-6A, Use with EX9CDS/EX9CDR Contactors
$24.79$24.79 -
Available Now! Available Now!Noark
EX9RD25A4
Overload Relay, Use with 9/12/18/25A Std, 2.5-4A, NR2-25G 2.5-4A, Use with EX9CDS/EX9CDR Contactors
$24.79$24.79 -
Noark
EX9RD93A93
Overload Relay, Use with 40/50/65/80/95A, 80-93A, NR2-93G 80-93A, Use with EX9CDS/EX9CDR Contactors
$51.41$51.41 -
Noark
EX9RD93A80
Overload Relay, Use with 40/50/65/80/95A, 63-80A, NR2-93G 63-80A, Use with EX9CDS/EX9CDR Contactors
$51.41$51.41 -
Noark
EX9RD11.5A4
Overload Relay, Use with 6/9/12A Mini, 2.5-4A, NR2-11.5G 2.5-4A, Use with EX9C Mini Contactors
$17.90$17.90 -
Noark
EX9RD11.5A2.5
Overload Relay, Use with 6/9/12A Mini, 1.6-2.5A, NR2-11.5G 1.6-2.5A, Use with EX9C Mini Contactors
$17.90$17.90 -
Noark
EX9RD11.5A10
Overload Relay, Use with 6/9/12A Mini, 7-10A, NR2-11.5G 7-10A, Use with EX9C Mini Contactors
$17.90$17.90
A motor starter is a contactor plus an overload relay; without an overload it is just a contactor.
A motor starter starts and stops a connected motor load and will provide protection in case of a sudden loss of power or if the motor overloads. A contactor is similar to a relay (but can handle larger amounts of electrical power and handle higher voltage loads) and is used for switching current on and off in a circuit. Contactors are used to control electrical loads and motors without providing overload protection.
a.k.a. motor starter, IEC contactor, dp contactor, thermal overload relay, motor protectors