-
Available Now! Available Now!Weg
CWB40-11-30C03
Contactor, IEC, 40A, 3 NO Pole, 24VDC Coil, Auxiliary 1NO/1NC, Screw Terminal, UL508
$83.85$83.85 -
Available Now! Available Now!Weg
CWB50-11-30C03
Contactor, IEC, 50A, 3 NO Pole, 24VDC Coil, Auxiliary 1NO/1NC, Screw Terminal, UL508
$120.90$120.90 -
Available Now! Available Now!Weg
CWB80-11-30C03
Contactor, IEC, 80A, 3 NO Pole, 24VDC Coil, Auxiliary 1NO/1NC, Screw Terminal, UL508
$162.63$162.63 -
Available Now! Available Now!Weg
CWB65-11-30C03
Contactor, IEC, 65A, 3 NO Pole, 24VDC Coil, Auxiliary 1NO/1NC, Screw Terminal, UL508
$136.50$136.50 -
Noark
EX9CS09D01B
IEC Contactor, Miniature, 24VDC, 9 Amp (9A), 1NC/3NO, DIN Rail 35mm & Panel Mountable, FVNR: Full Voltage, Non-Reversing, UL508, EX9CS Series
$16.58$16.58 -
Weg
CWB110-11-30E65
Contactor, IEC, 110 Amp (110A), 3NO, 110-255VDC, 50/60Hz, Screw Terminal, 5.85 x 2.83 x 5.69" (HWD)
$214.50$214.50 -
Weg
CWB110-11-30E04
Contactor, IEC, 110 Amp (110A), 3NO, 24-60VDC, 50/60Hz, Screw Terminal, 5.85 x 2.83 x 5.69" (HWD)
$214.50$214.50 -
Weg
CWB110-11-30D77
Contactor, IEC, 110 Amp (110A), 3NO, 208VAC, 50/60Hz, Screw Terminal, 5.85 x 2.83 x 5.69" (HWD)
$163.80$163.80 -
Weg
CWB110-11-30D39
Contactor, IEC, 110 Amp (110A), 3NO, 480VAC, 50/60Hz, Screw Terminal, 5.85 x 2.83 x 5.69" (HWD)
$163.80$163.80 -
Weg
CWB110-11-30D24
Contactor, IEC, 110 Amp (110A), 3NO, 230VAC, 50/60Hz, Screw Terminal, 5.85 x 2.83 x 5.69" (HWD)
$163.80$163.80 -
Weg
CWB110-11-30D15
Contactor, IEC, 110 Amp (110A), 3NO, 120VAC, 50/60Hz, Screw Terminal, 5.85 x 2.83 x 5.69" (HWD)
$163.80$163.80 -
Weg
CWB110-11-30D02
Contactor, IEC, 110 Amp (110A), 3NO, 24VDC, 50/60Hz, Screw Terminal, 5.85 x 2.83 x 5.69" (HWD)
$163.80$163.80
A motor starter is a contactor plus an overload relay; without an overload it is just a contactor.
A motor starter starts and stops a connected motor load and will provide protection in case of a sudden loss of power or if the motor overloads. A contactor is similar to a relay (but can handle larger amounts of electrical power and handle higher voltage loads) and is used for switching current on and off in a circuit. Contactors are used to control electrical loads and motors without providing overload protection.
a.k.a. motor starter, IEC contactor, dp contactor, thermal overload relay, motor protectors