-
Available Now! Available Now!Weg
CWM18-10-30V47
Contactor, IEC, 18 Amps, 1NO, 480VAC, 3-Pole, UL508, Use RW Overload Relay
$44.29$44.29 -
Available Now! Available Now!Weg
CWM18-10-30V24
Contactor, IEC, 18 Amps, 1NO, 208-240VAC, 3-Pole, UL508, Use RW Overload Relay
$44.29$44.29 -
Weg
CWB18-11-30C03
Contactor, IEC, 18 Amp (18A), 3NO, 24VDC Coil, Auxiliary 1NO/1NC, Screw Terminal, UL508
$48.17$48.17 -
Available Now! Available Now!Weg
CWM18-10-30V18
Contactor, IEC, 18 Amps, 1NO, 120VAC, 3-Pole, UL508, Use RW Overload Relay
$44.29$44.29 -
Available Now! Available Now!Weg
CWB18-11-30V24
Contactor, IEC, 18A, 3 NO Pole, 208-240VAC Coil, 50/60Hz, Auxiliary 1NO/1NC, Screw Terminal, UL508
$40.17$40.17 -
Weg
CWB18-11-30D77
Contactor, IEC, 18A, 3 NO Pole, 208VAC Coil, 50/60Hz, Auxiliary 1NO/1NC, Screw Terminal, UL508
$40.17$40.17 -
Weg
CWB18-11-30D45
Contactor, IEC, 18A, 3 NO Pole, 600VAC Coil, 50/60Hz, Auxiliary 1NO/1NC, Screw Terminal, UL508
$40.17$40.17 -
Weg
CWB18-11-30D39
Contactor, IEC, 18A, 3 NO Pole, 480VAC Coil, 50/60Hz, Auxiliary 1NO/1NC, Screw Terminal, UL508
$40.17$40.17 -
Weg
CWB18-11-30D33
Contactor, IEC, 18A, 3 NO Pole, 380VAC Coil, 50/60Hz, Auxiliary 1NO/1NC, Screw Terminal, UL508
$40.17$40.17 -
Weg
CWB18-11-30D25
Contactor, IEC, 18A, 3 NO Pole, 240VAC Coil, 50/60Hz, Auxiliary 1NO/1NC, Screw Terminal, UL508
$40.17$40.17 -
Available Now! Available Now!Weg
CWB18-11-30D15
Contactor, IEC, 18A, 3 NO Pole, 120VAC Coil, 50/60Hz, Auxiliary 1NO/1NC, Screw Terminal, UL508
$40.17$40.17 -
Weg
CWB18-11-30D07
Contactor, IEC, 18A, 3 NO Pole, 48VAC Coil, 50/60Hz, Auxiliary 1NO/1NC, Screw Terminal, UL508
$40.17$40.17
A motor starter is a contactor plus an overload relay; without an overload it is just a contactor.
A motor starter starts and stops a connected motor load and will provide protection in case of a sudden loss of power or if the motor overloads. A contactor is similar to a relay (but can handle larger amounts of electrical power and handle higher voltage loads) and is used for switching current on and off in a circuit. Contactors are used to control electrical loads and motors without providing overload protection.
a.k.a. motor starter, IEC contactor, dp contactor, thermal overload relay, motor protectors