Altech CTS4U terminal blocks are the most versatile terminals for wire-to-wire connection in your application!
A special design feature on the flexible foot enables easy mounting and dismounting from the DIN Rail with the help of a screwdriver. Altech terminal blocks feature screw clamps for maximum wiring efficiency and reliability.
The terminal blocks are supplied with open clamps, ready to accept wires. No special wire preparation or wire lugs are required.
Simply strip the wire, insert and tighten the screw to the torque for gas-tight, vibration resistant, solid connections.
The screw clamp design on our terminal blocks uses a tin-plated, solid copper or solid brass current bar with grooved serration, a steel cage clamp and screws.
As the clamp is tightened, the wire is pressed firmly against the current bar, ensuring positive connections every time. The steel parts are zinc plated and passivated by a golden yellow chromate layer for maximum resistance against oxidation.
When applying tightening torques, use our straight blade screwdriver to fit the screw hole guides located in the terminal block housings.
The metal parts of Altech terminal blocks are housed in precision-molded, self-extinguishing polyamide 6.6 material for maximum dielectric strength, electrical insulation and temperature resistance.
Standard features on all housings include funnel-shaped wire entry openings and screwdriver guides.
Our Altech terminal block family offers screw and spring clamp models for DIN rail and panel mount applications. This advanced line of wire termination products will increase your design options and help to get the job done more efficiently.
The line of blocks also include feed-through (single, double or triple level), distribution, ground, fuse, disconnect thermocouple, surge suppressor and indicator. A wide variety of accessories, tools and ferrules are available.
|Product Type||Screw Clamp|
|Amp Rating||See Spec|
|Weight - lbs.||0.0200|
|Base Unit of Measure||Each|
- 6mm feed-through terminal block
- Rated for 40 amps
- 45 mm H x 43 mm L
- Gray is standard
- Also available in white, yellow, red, blue, black, orange or green
- End plate and separator plate available as accessories
- Standard pack is 100 pieces
- Universal DIN rail mounting
- Standard screw clamp
- Feed-through terminals