Weg
-

CFW100040SDZ

Alternate Part Number: 
New Series: CFW300A04P2S2NB20
$161.55
In stock
AC Drive, 1hp, 230V, 4.0A, Single Phase, Compact, w/out Potentiometer

The CFW10 and CFW100 have been replaced by the CFW300 series - learn more here.

Effective July 1, 2017 the Weg CFW10 series is considered non-stock. The replacement series is the Weg CFW300 series; smaller footprint, more features and the exact same price! To learn more read our blog introducing the new and improved CFW300!

WEG CFW10 series is a low cost option when you need to operate a three phase motor where only single phase power exists! 

The Weg CFW10 will take either 120V (SA model) or 230 volt (SD model) single phase input power and convert it to three phase, 230 volt without the need for a transformer.

Programming is made easy with a keypad and bright LED display and can operate in ambient temperatures up to 122°F (50°C) without de-rating. The CFW10 is a simple, rugged drive that will give long lasting performance in the most extreme conditions.

This drive is great for applications such as:

  • General Machines
  • Centrifugal Pumps
  • Processing Pumps
  • Fans / Exhausters
  • Stirrers / Mixers
  • Extruding Machines
  • Roller Tables
  • Cutting Machines
  • Rotating Filters

Additional Features Include

  • IP20 finger safe enclosure
  • V/Hz control
  • Overload capacity: 150% corrient in 60 sec.
  • Can operate in ambient temperatures up to 122°F (50°C) without derating
  • Display shows motor speed, frequency, voltage, current, last fault, heatsink temperature and drive status
  • DSP controlled PWM output
  • 2.5-15 kHz adjustable switching frequency
  • Four isolated programmable digital inputs
  • Scalar control (V/F) or vector control (VVW)
  • RFI Filter built-in (optional)
  • Programmable relay output
  • Motor ratings at IEC power, for NEMA ratings please see brochure
  • One isolated programmable analog input
  • All the electronic boards are conformally coated classified as 3C2 according to IEC 60721-3-3 standard
  • Diagnostic features: Over current, motor overload, drive over temperature, output short circuit, DC bus over and under voltage and external fault
  • Control features: Linear and S-Ramp acceleration and deceleration, local / remote control, DC braking, torque boost, motor slip compensation, electronic pot, preset speeds, minimum and maximum adjustable frequency limits, adjustable output current limit, JOG
  • Display readings: Motor speed, frequency, voltage, current, last fault, heatsink temperature and drive status
  • Ambient: 122°F (50°C), 3300 ft (1000 m) altitude, 90% humidity, non-condensing
  • **Please note on each drive whether it is with or without potentiometer
More Information
SKU CFW100040SDZ
Alternate Part Number New Series: CFW300A04P2S2NB20
Input Voltage 200/240V, Single Ph. Only
Horsepower 1 hp
Output 3 Phase Output
Housing/Enclosure NEMA 1 or IP20 (See Spec)
Type of Drive Volts per Hertz (V/Hz)
Options No Special Options
Availability Please Contact Us
Product Series CFW10 Series
Warranty 3 Years
Weight - lbs. 2.0000

Horsepower

  • 1 HP

Rated Input Voltage

  • 200V-15% to 230V+10%
  • Single phase
  • 50/60Hz ±2Hz

Rated Output Current

  • 230V, 3 phase
  • 4.0 amps

Dimensions

  • Height: 5.2 in
  • Width: 3.8 in
  • Depth: 4.8 in

Weight

  • 2 lbs

Housing

  • IP20

Without Potentiometer

Write Your Own Review
You're reviewing:AC Drive, 1hp, 230V, 4.0A, Single Phase,
Your Rating
We found other products you might like!
Copyright © 2018-present Wolfautomation. All rights reserved.