Effective July 1, 2017 the Weg CFW10 series is considered non-stock. The replacement series is the Weg CFW300 series; smaller footprint, more features and the exact same price! To learn more read our blog introducing the new and improved CFW300!
WEG CFW10 series is a low cost option when you need to operate a three phase motor where only single phase power exists!
The Weg CFW10 will take either 120V (SA model) or 230 volt (SD model) single phase input power and convert it to three phase, 230 volt without the need for a transformer.
Programming is made easy with a keypad and bright LED display and can operate in ambient temperatures up to 122°F (50°C) without de-rating. The CFW10 is a simple, rugged drive that will give long lasting performance in the most extreme conditions.
This drive is great for applications such as:
-
- General Machines
- Centrifugal Pumps
- Processing Pumps
- Fans / Exhausters
- Stirrers / Mixers
- Extruding Machines
- Roller Tables
- Cutting Machines
- Rotating Filters
Additional Features Include
- IP20 finger safe enclosure
- V/Hz control
- Overload capacity: 150% corrient in 60 sec.
- Can operate in ambient temperatures up to 122°F (50°C) without derating
- Display shows motor speed, frequency, voltage, current, last fault, heatsink temperature and drive status
- DSP controlled PWM output
- 2.5-15 kHz adjustable switching frequency
- Four isolated programmable digital inputs
- Scalar control (V/F) or vector control (VVW)
- RFI Filter built-in (optional)
- Programmable relay output
- Motor ratings at IEC power, for NEMA ratings please see brochure
- One isolated programmable analog input
- All the electronic boards are conformally coated classified as 3C2 according to IEC 60721-3-3 standard
- Diagnostic features: Over current, motor overload, drive over temperature, output short circuit, DC bus over and under voltage and external fault
- Control features: Linear and S-Ramp acceleration and deceleration, local / remote control, DC braking, torque boost, motor slip compensation, electronic pot, preset speeds, minimum and maximum adjustable frequency limits, adjustable output current limit, JOG
- Display readings: Motor speed, frequency, voltage, current, last fault, heatsink temperature and drive status
- Ambient: 122°F (50°C), 3300 ft (1000 m) altitude, 90% humidity, non-condensing
- **Please note on each drive whether it is with or without potentiometer
| Product Series | CFW10 |
|---|---|
| Input Voltage | 200/240V, Single Ph. Only |
| Horsepower | 1 hp |
| Output | 3 Phase Output |
| Housing/Enclosure | NEMA 1 or IP20 (See Spec) |
| Type of Drive | Volts per Hertz (V/Hz) |
| Options | No |
| Availability | Please Contact Us |
| Product Series | CFW10 Series |
| Warranty | 18 Months |
| Weight - lbs. | 2.0000 |
| Specification Tab | Horsepower
Rated Input Voltage
Rated Output Current
Dimensions
Weight
Housing
With Potentiometer |
| Resources | Need More Information? |
Need More Information?
Horsepower
- 1 HP
Rated Input Voltage
- 200V-15% to 230V+10%
- Single phase
- 50/60Hz ±2Hz
Rated Output Current
- 230V, 3 phase
- 4.0 amps
Dimensions
- Height: 5.2 in
- Width: 3.8 in
- Depth: 4.8 in
Weight
- 2 lbs
Housing
- IP20
With Potentiometer
There are no customer reviews yet.
similar products
Add products by clicking ‘compare’ from any item page.
- Phone: 847-658-8130
- Fax: 847-658-0960
Marshall Wolf Automation, Inc.
923 South Main Street
Algonquin, IL 60102