Hitachi Drives


Alternate Part Number: 
Being Replaced by # P1-00228-LFUF
In stock
AC Drive, 5hp, 200-240V, 3 Phase, Available Only While Stock Lasts!
The SJ700D series is being discontinued and is available only while stock lasts! The new series is SJ P1.

Our Hitachi SJ700D can be used for both heavy and normal duty applications thanks to its dual rated (constant/variable) high torque performance (200% @ 3Hz). The SJ700D series can drive both induction motors (IM) and permanent magnetic motors (PM).

Hitachi's SJ700D position control function offers servo-like performance allowing for automatic speed control according to a load situation for applications such as cranes or a conveyor. This drive is easy to setup and operate by standard keypad or optional PC-based configuration software

The SJ700D can perform up to 5 tasks independently.

The Hitachi SJ700D series replaced the SJ700B series. It also replaced the SJ700 series for drives below 200hp. For drives higher than 200hp, please see the SJ700 series.

Our drives are rated for amps, please check amp rating when sizing for variable torque.

  • You get motor full load amps

Additional features include:

  • Modbus/RTU standard
  • EzSQ Internal PLC-like controller
  • Internal DB transistor up to 22kW (30hp)
  • V/Hz CT & VT, PLUS Sensorless Vector (SLV) control modes
  • High starting torque of 200% or greater at 0.3 Hz
  • EMC filter (C3) integrated up to 160 kW in 400V and 75 kW in 200V

This series is available in:

  • 200-240 volt, 3 phase, 1/2 to 75 hp
  • 380-480 volt, 3 phase, 1 to 200 hp
  • Drives higher than 200hp will remain the SJ700 series

*This series has replaced the SJ700B and the lower hp (below 200) SJ700 series.

The SJ700 series had replaced the SJ300 and the X700 series before being replaced itself by the SJ700D.

Want to find out more about AC Drives? We've got you covered with an entire blog section dedicated to just that, just click hereOur tech support covers topics like "What are the Benefits of a VFD?" and "Variable Frequency Drives vs. Phase Converters."

More Information
Part Number SJ700D-037LFUF3
Alternate Part Number Being Replaced by # P1-00228-LFUF
Availability Please Contact Us
Weight - lbs. 7.7000
Base Unit of Measure Each


  • CT: 5 HP
  • VT: 7.5 HP

Rated Input Current

  • 200V-15% to 240V+10%, 3 phase
  • 50/60Hz ±5%
  • CT: 18 amps
  • VT: 23 amps

Rated Output Current

  • 200/240V, 3 phase (corresponding to input voltage)
  • CT: 16.5 amps
  • VT: 19.6 amps


  • Height: 10.04 in
  • Width: 5.91 in
  • Depth: 5.51 in


  • 7.7 lbs


  • IP20
Write Your Own Review
You're reviewing:AC Drive, 5hp, 200-240V, 3 Phase,
Your Rating
Copyright © 2018-present Wolfautomation. All rights reserved.