Control the output of a variable speed motor drive from any external grounded or ungrounded DC input signal! 
|
|
The Dart Controls VSI series is a single model that accepts a wide range of input voltages (0-5 through 0-25VDC or 0-25 through 0-250VDC). The GAIN trimpot is used to adjust the output of the Dart Controls VSI to full on when a full speed signal is applied to its input terminals. The VSI incorporates Dart’s unique feedback circuit, which virtually eliminates output changes due to the thermal drift of logic components. The VSI is packaged in an aluminum chassis mount housing and contains an on-board power supply for its logic circuit. An electrical isolation rating of 2500Vrms is achieved by the use of an optically isolated IC package. The Dart VSI can be used with virtually any motor speed control that has a speed reference circuit of +5 to +15VDC and an input impedance greater than 47K ohms. The output of the VSI is a filtered, pulse width modulated signal that is directly proportional to the input speed signal. The wide input range allows the VSI to follow signals as low as +0-5V logic levels and up to the 180VDC levels present at the armature leads of a 180VDC motor. By simply connecting the input terminals across the armature leads of a “master motor”, you can use the VSI for master/follower operation. The addition of a scaling pot will provide for proportional follower operation. |
Features
Files and Links
|
||||||
