| Motovario SmartBox™ was designed to be the most competitive high-efficiency gear reducer series in today's market.
The Modularity Concept of Motovario SmartBox™ means modular production and modular assembly for modular gear reducers. SmartBox™ is built with standardized parts, sharing gears, shafts, input sets and output shafts and flanges. SmartBox™ gear reducers are easily adapted for any application.
Taper Roller Bearing output support on all models improves overhung load ratings and shock-load capacity.
In-line reducers sizes 030-050 are sealed and maintenance-free. No breathers are required, making them ready as standard for sanitary applications. All SmartBox PH and IH series reducers are approved for the baking industry by BISSC.
SmartBox H series housings have wide bearing support seats. The wider supports mean better load and shock handling and less stress on the reducer housing. The reducer feet, typically the focal point for torsion and other stresses, are relieved of some strain. By easing the stress on the reducer housing, reducer failure due to overhung load is eliminated.
|
- Part number H Series
- Manufactured by Motovario
- Minimum ratio: 1.23/single stage
- Maximum ratio: 282.10/triple stage
- HP Range: 1/6 – 200HP (@ 1750RPM)
- NEMA C-face: 56C-360TC
- Sizes: 8 sizes, 22 versions, 30-140mm
- % efficiency: single stage up to 98%, two stage up to 96%, three stage up to 94%
- Designed for continuous duty and use in harsh or stressful applications
- Gears and hollow output bores are carburized to a hardness of 58-60 RC
- Load capacity calculated according to ISO 6336 and verified according to AGMA 2001-B88
- High-strength housings and input and output flanges of gray cast-iron G200
- Single stage reducers with efficiencies up to 98% (in-line helical H Series only)
- Double and triple stage reducers with efficiencies up to 95%
- All SmartBox reducers come filled with ISO VG220 mineral oil
- Painted as standard with blue epoxy-polyester powder-coat RAL 5010
- BISSC Approved gear reducers
- UL/CSA Approved gearmotors
- Foot mount, flange mount, shaft mount, foot/flange mount and other configurations available
|
