Rugged steel enclosures and ranges up to 150 hp.
Available for general industrial applications or HVAC and other process type applications!
Creating a quote is easy. Just add your products to the shopping cart, then click the "Create Quote" button.
Please note: Our variable frequency drives have a 3 phase output and are to be used with 3 phase motors.
Not the drive you were looking for? Search all of our variable frequency drives now!
The AC Tech Lenze M/MC Series drives are built in rugged steel enclosures that hold up to daily life on the factory floor. The easy to read 16 character LCD display above the drive keypad allows for easy and intuitive set up as well as daily operation.*1/4 through 150HP (0.18 - 110kW)
*Input voltages from 120V single phase (with voltage doubler) to 590VAC
*NEMA Type 1, 12, 4 and 4X Enclosures
This constant horsepower drive can be set up for simple applications requiring ramped start, ramped stop and speed control to demanding applications that require PID set-point control and many other functions. The AC Tech Lenze M/MC Series consists of the MC1000 and MC3000 models; most applications will use the MC1000 with a keypad that includes Start, Stop, up, down, forward/reverse, Program/Run, Auto/Manual and Enter buttons.
For non-reversing applications that require independent switching of start and stop from local to remote and speed control from auto to manual, the MC3000 series keypad replaces the forward/reverse button with Local/Remote.
The M1000 industrial drives:
The intelligent, versatile and cost-effective choice for industrial applications.
From harsh environments to high torque loads, the M1000 Series microdrives meet the toughest requirements with outstanding reliability, at a low cost. The easy-to-program M1000 offers full features, extensive I/O, and a full array of programmable functions. The M1000 is available in a power range of 1/4 to 150 HP (0.18 - 110 kW) and voltages ranging from 115 to 575 VAC.
With its Enhanced Torque System (ETS), a highly efficient sine coding algorithm and "auto-voltage boost," the M1000 delivers maximum starting and accelerating torque and tight speed regulation, even under fluctuating load conditions. A built-in, UL-approved thermal overload provides full motor protection.
The M3000 industrial drives
The choice when your process control demands fast acceleration and response.
Designed expressly for use where the motor control is an integral part of a process, the M3000 is rated for constant torque applications but can easily be configured for variable torque applications.
Most "process control" drives are designed for variable torque applications where the motor is driving a centrifugal fan or pump. As such, these drives are limited to 110% current for overload situations such as acceleration or responding to a feedback change.
The AC Tech Lenze M3000 is a true Constant Torque drive rated for 180% of rated current for 30 seconds and 150% for one minute; this allows faster response to system changes and the ability to apply the MC3000 to non-centrifugal applications such as compressors, conveyors and other "constant torque" loads.The M3000 is available in the same power ranges and voltages as the M1000.
Additional Options are avaiable - Please call for pricing.
Notice from Lenze May 2013: The power modules used in the 240 volt Micro Drives rated 40HP and higher were discontinued by the manufacturer and there are no acceptable substitutes.
Once stock is depleted, we will no longer be able to build the 240VAC 40HP drive. For applications requiring 40 HP at 230V, you will be able to purchase the 230V 60HP MC Series while power modules at this rating remain available.
As a result, we are removing these ratings from our published literature and price books. The updated price book is attached and updated sales literature is available from our web site.
Here are the affected models: MC12400B and MC32400B, MC12600B and MC32600B
We apologize for any inconvenience that this discontinuance may cause.